北京优利威科技有限公司推出H6系列0-360度可自定义量程智能双轴倾角传感器，详情致电010-51294688/15710035457，或访问www.univotec.com
User-Configurable,
Accurate All-in-One
Inclinometer
FEATURES
Dual Axis
Scalable Angle Range up to ±180° Temperature Compensated Outputs:
o Analog Current 4..20mA
o Digital RS-485
Outputs Optional:
o CAN
o Open Collector Switch
Daisy-chain Multiple Sensors Vibration and shock resistant Environmentally sealed IP68 Rugged metal housing
EMC protected to 100V/m
Overvoltage/overcurrent protection
-40° to +85°C Operating Temperature
CE Certificate of Conformance
APPLICATIONS
Platform Leveling
Solar Panel Array Alignment
Vehicle Tilt Monitoring
Antenna Positioning
Boom Angle Indicating
Process Controls
INDUSTRIES
Aerospace & Defense
Construction
Energy
Mining
Offshore
Transportation
DESCRIPTION
The H6 inclinometer provides dual axis inclination sensing in a rugged environmentally protected housing.
This unit incorporates a MEMS sensing element referenced to gravity with integrated temperature compensation over the industrial operating range of -40° to +85°C.
The H6 provides a continuous analog current 4..20mA output and a selectable digital output of a polled RS-485 half–duplex (2-wire) output. Available upon request, the H6 is CAN ready with customer specified protocols. All outputs are linear with respect to the input angle directly.
Used as integrated devices by original equipment manufacturers (OEMs) or as standalone sensors for test and measurement, the H6 is made for applications where high accuracy and long-term stability are required in noisy and wide temperature changing environments.
The output parameters can be modified at the factory to meet your specifications (i.e. range, polarity). We also offer the Flex Series Development Kit allowing the end customer to modify the sensor as needed right from a PC – providing full flexibility for R&D and OEM production lines.
For use with most all applications including commercial, industrial, military applications.
TABLE 1: H6 SENSOR SPECIFIATIONS | |||
INPUT PARAMETERS | |||
SUPPLY VOLTAGE | +12..36 VDC Non-Regulated | ||
22mA @ 24VDC (Digital Output only) | |||
SUPPLY CURRENT1 | 30mA @ 24VDC (Analog Output - no load) | ||
75mA @ 24VDC max (Analog and Digital Outputs enabled) | |||
85mA @ 12VDC max (Analog and Digital Outputs enabled) | |||
ANALOG MEASURING RANGE | Scalable To ±180° | ||
DIGITAL MEASURING RANGE | ±180° | ||
INPUT PROTECTION | Reverse Polarity, ESD & Surge Protected | ||
ABSOLUTE ACCURACY OVER FULL OPERATING TEMPERATURE | |||
RANGE: ±180° | ±0.1º | ||
CURRENT OUTPUT PARAMETERS | |||
OUTPUT TYPE | Factory Default: 4..20 mA (Configurable within 0..24mA) | ||
SENSITIVITY2 | Relative to Scaled Range | ||
NULL (0º) | Factory Default: 12 mA Nominal (User Configurable) | ||
RESOLUTION | 0.05º Max | ||
FREQUENCY RESPONSE | 0.5Hz Nominal | ||
DIGITAL OUTPUT PARAMETERS | |||
OUTPUT TYPE | RS-485 Half Duplex (2-wire) | ||
INCLINATION OUTPUT | IEEE Packetized 32-Bit Float | ||
BAUD RATE | 125K Default (Configurable within 9600 to 250K) | ||
BYTE FORMAT | 8 Data Bits, No Parity, 1-stop Bit, No Flow Control, CRC16 Checksum | ||
PACKET FORMAT | See Installation Guide for Packet Details and Commands | ||
INFORMATION RATE | Polled (up to 20 times/sec) | ||
TEMPERATURE RANGES | |||
OPERATING TEMPERATURE | -40ºF..+185ºF (-40ºC..+85ºC) | ||
STORAGE TEMPERATURE | -49ºF..+194ºF (-45ºC..+90ºC) | ||
MECHANICAL CHARACTERISTICS | |||
HOUSING | Aluminum, IP68, All-weather, Submersible | ||
WEIGHT | 18.6 oz. (525 Grams) | ||
MOUNTING HOLES | Accept #8 or M4.5 screws (See Dimensional Drawing) | ||
MOUNTING PLANE | Flat Horizontal Surface | ||
OUTLINE DIMENSIONS | 4.34” x 3.26” x 1.8” | ||
ELECTRICAL CONNECTION | See Electrical Connection Drawing | ||
Notes: 1. Supply Current varies depending on outputs connected. Digital output only assumes analog output section is | |||
always active however current loop is not connected. 2. Sensitivity defined as (max current range) / (sensor input range). | |||
Ex, A current range set to 4..20mA with a ±30°input range will have a corresponding sensitivity of 16mA/60°or 0.267mA/°. | |||
